計算機數量過多，無法給計算機網線做好表示，給網絡維護工作帶來不便?在給局域網進行標準化改造過程中，給交換機與計算機相鏈接的網線配對是一項非常繁瑣的工作。

網線配對的四種常見方法

1、使用網線測線器

把所有的網線從交換機)上拔下，把測線器的發射端連接在計算機一端的網線上，然後用接收端逐一測試交換機端的網線，找出有信號連通指示的一端，套上號碼管，插入交換機相應位置，並做好記錄。

2、逐一開啟計算機

觀察交換機哪個位置的指示燈會亮起來，相應端口的網線即是與剛開啟計算機相連的那根了。

3、網線「熱插拔」

在開啟計算機的情況下，拔下與網卡相連的網線，觀察交換機上哪個位置的指示燈熄滅，從而確定與計算機相連的網線。

4、大數據拷貝法

從指定的計算機拷貝數據，通過觀察交換機快速閃爍的數據指示燈來確定相連的計算機。

* * * * * *

創世服務有限公司是一間提供專業數據中心架設公司，擁有一群專業團隊貼心地關注客戶的要求，並提供優質的服務。

想了解更多關於「綜合佈線技術中網線配對的四大法寶」的內容，請瀏覽創世官網：http://livservices.com.hk

地址: 香港觀塘鴻圖道37-39號鴻泰工業大廈4樓4室

電話：852-31063235

——————

Four common methods of cable matching

1, the use of cable line measuring device

All the cable from the switch) to unplug the transmitter of the transmitter connected to the end of the computer network, and then use the receiver one by one test the switch side of the network cable to find a signal connected to the end of the instructions, put on the number tube , Insert the corresponding location of the switch, and make a record.

2, one by one to open the computer

Observe the switch where the indicator light will light up, the corresponding port cable is connected with the computer just connected to the root of the.

3, the network cable "hot swap"

In the case of opening the computer, unplug the network cable connected to the network card, observe the switch on the location of the light is off, so as to determine the network connected to the computer.

4, large data copy method

Copy the data from the specified computer and determine the connected computer by observing the switch's flashing data indicator.

* * * * * *

LIV is a professional data center to set up a company, with a group of professional team intimate attention to customer requirements, and provide quality services.

For more information about 'Four common methods of cable matching'，please visit : http://livservices.com.hk

Address: Unit 4, 4/F., Hung Tai Industrial Building,

37-39 Hung To Road, Kwun Tong, Hong Kong

Tel: +852 3106 3235